Tuesday, December 27, 2011
2011 Hall of Fame Inductions -
William D. Kleine
William D. "Bill" Kleine is inducted into the Petroleum Hall of Fame. Choosing the oil industry over pro basketball, Bill eventually grew his company, The Permian Corporation, into the world leader in crude oil marketing.
Access this Podcast.

View 2011 Hall of Fame Inductions - William D. Kleine with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Tuesday, November 29, 2011
System Design & Diagnostic Analysis of Group 2 Systems - John Svinos
John Svinos gives a presentation at the 7th Annual Sucker Rod Pumping Workshop. John covers topics related to fluid inertia effects at the pump and the resulting dyno cards of this effect.
Access this Podcast.

View System Design & Diagnostic Analysis of Group 2 Systems - John Svinos with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Monday, October 24, 2011
2011 Hall of Fame Inductions - Mack C. Chase & John R. Gray
Mack C. Chase & John R. Gray are inducted into the Petroleum Hall of Fame. Creators of Marbob Energy Corporation, these two men were not only respected in the oil industry, they were also well respected members in their communities.
Access this Podcast.

View 2011 Hall of Fame Inductions - Mack C. Chase & John R. Gray with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Monday, September 19, 2011
2011 Hall of Fame Inductions - Dr. Sam G. Gibbs
Dr. Sam G. Gibbs is inducted into the Petroleum Hall of Fame. Famous for the wave equation and many other contributions to rod pumping optimization, Dr. Gibbs is introduced with a short history of his work, which is then followed by his acceptance speech.
Access this Podcast.

View 2011 Hall of Fame Introductions - Dr. Sam G. Gibbs with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Monday, September 19, 2011
2011 Hall of Fame Inductions - Intro
The 2011 Hall of Fame Induction Dinner and Ceremony, held at the Petroleum Museum, begins with an introduction to honorees Mack C. Chase & John R. Gray, I. Jon Brumley, Dr. Sam G. Gibbs, and William D. "Bill" Kleine.
Access this Podcast.

View 2011 Hall of Fame Introductions - Intro with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Monday, January 17, 2011
Sand Problems with Sucker Rod Pumps
Benny Williams of Harbison Fischer presents a series of pumps and pump components that are engineered to handle particulates.
Access this Podcast.

View Sand Problems with Sucker Rod Pumps with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Monday, January 3, 2011
Development, Testing, and Field Results of New Sucker Rod Grade
Arun Sriraman from UPCO talks about the results from testing their new sucker rods. Bar graphs and test cases combine to show how these new rods perform.
Access this Podcast.

View Development, Testing, and Field Results of New Sucker Rod Grade with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Wednesday, December 22, 2010
SROD and RODSTAR Comparison
Fred Morrow compares SROD and RODSTAR using pump cards and pump data from varying depths and pressures.
Access this Podcast.

View SROD and RODSTAR Comparison with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Thursday, December 9, 2010
Unaccounted Sources of Friction Lead to Sticking and Other Problems
Lynn Rowlan of Echometer shows various cases with sticking pumps, dampening, parrafin friction, and how to fix other plunger and rod string problems.
Access this Podcast.

View Unaccounted Sources of Friction Lead to Sticking and Other Problems with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Friday, December 3, 2010
Drive Gas to Market
Mark Lancaster of Permian Production Equipment talks about The Beam Gas Compressor and how it can increase production while saving money.
Access this Podcast.

View Drive Gas to Market with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Friday, October 8, 2010
RODSTAR-D Output Report and Options
In this tutorial, John Svinos demonstrates the many options of viewing, copying, and emailing RODSTAR-D reports.
Access this Podcast.

View RODSTAR-D Output Report and Options with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Friday, October 1, 2010
Using RODSTAR-D for Vertical Wells, Quick Design, and XBAL Recommendations
John Svinos goes into detail on how to use RODSTAR-D in vertical mode. This tutorial also covers designing wells quickly and how to import XBAL balancing recommendations into RODSTAR-D.
Access this Podcast.

View Using RODSTAR-D for Vertical Wells, Quick Design, and XBAL Recommendations with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Thursday, September 23, 2010
How to Use XTOOLS
John Svinos shows how to use XTOOLS. XTOOLS has 6 modules that are all covered in this tutorial including a SPM, sheave, tubing anchor, and pump slippage calculators.
Access this Podcast.

View How to Use XTOOLS with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Friday, September 16, 2010
How to Load Files From XDIAG into RODSTAR
John Svinos gives a tutorial on how to open an XDIAG file and import the data into RODSTAR-D. Comparisons between predicted and measured dynomometer cards are included as well as how to maximize efficiency.
Access this Podcast.

View How to Load Files From XDIAG into RODSTAR-D with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Friday, September 10, 2010
How to Analyze and Redesign a Rod Pumping System with XBAL, XDIAG, XROD, and XTOOLS
John Svinos shows how to use multiple programs together to redesign a rod pumping system. Not only will you learn how to use all of these programs, John shows the user how to maximize efficiency and save money.
Access this Podcast.

View How to Analyze and Redesign a Rod Pumping System with XBAL, XDIAG, XROD, and XTOOLS with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Friday, September 03, 2010
How Accurate is RODSTAR-D
John Svinos goes through a series of dynamometer cards to show the accuracy of RODSTAR-D.
Access this Podcast.

View How Accurate is RODSTAR-D with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Friday, August 27, 2010
How to Design Group 2 Wells
John Svinos demonstrates how to use RODSTAR-V and RODSTAR-D to design Group 2 wells.
Access this Podcast.

View How to Design Group 2 Wells with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Friday, August 20, 2010
How to Use XBAL
In this tutorial, John Svinos shows the user how to enter data into XBAL and how to use it along with XDIAG, RODSTAR, and other Theta software.
Access this Podcast.

View How to Use XBAL with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Tuesday, August 10, 2010
How to Use RODSTAR-D: Part 2
In the second part of this tutorial, John Svinos shows users more settings in the new version of RODSTAR-D.
Access this Podcast.

View How to Use RODSTAR-D: Part 2 with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Tuesday, August 10, 2010
How to Use RODSTAR-D: Part 1
John Svinos teaches you how to use RODSTAR-D. This tutorial demonstrates step-by-step how to enter data for a new deviated rod pumping system design, how to import wellbore deviation from an Excel file, viewing a 3D plot of the wellbore and more.
Access this Podcast.

View How to Use RODSTAR-D: Part 1 with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Friday, July 23, 2010
Reference Loads, Pump Cards, and Incomplete Pump Fillage
Lynn Rowland shows multiple pump cards with fluid pound, gas interference, and blocked pump intakes. How to diagnose and fix these problems is also included.
Access this Podcast.

View Reference Loads, Pump Cards, and Incomplete Pump Fillage with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Thursday, July 22, 2010
Sucker Rod String Service Factors
Norman Hein explains how the Goodman diagram and fatigue curves can help understand the tensile strength of grade C and D rods. An allowable stress formula is used to show how service factors affect the diagram.
Access this Podcast.

View Sucker Rod String Service Factors with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Friday, July 2, 2010
Partial History of Circumferential Displacement
Russell Stevens gives a brief history of tests done on coupling design technology using old sketches, past and present photography, and flow charts on the life of a bolted joint.
Access this Podcast.

View Partial History of Circumferential Displacement with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Thursday, July 1, 2010
Sucker Rod Characteristics and Updated Displacement Values - UPCO
Arun Sriraman gives a presentation on the factors of choosing a sucker rod. Stess strain curves and graphs about sucker rod toughness are included.
Access this Podcast.

View Sucker Rod Characteristics and Updated Displacement Values - UPCO with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Monday, June 28, 2010
Strain Gauge Testing and Analysis on the Factors Affecting Sucker Rod Coupling Make-Up - UPCO
Arun Sriraman gives a presentation on three main parameters of comparison for sucker rod coupling. Interesting graphs on strain and various tests that were performed are included.
Access this Podcast.

View Strain Gauge Testing and Analysis on the Factors Affecting Sucker Rod Coupling Make-Up - UPCO with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Thursday, June 10, 2010
XANIMATE 2.0 - New and Improved High Quality Rod Pumping Animations
John Svinos shows the new version of XANIMATE and talks about the new animations, features and compatibility with Windows 7 and Vista.
Access this Podcast.

View XANIMATE 2.0 - New and Improved High Quality Rod Pumping Animations with streaming video in high resolution.

View XANIMATE 2.0 - New and Improved High Quality Rod Pumping Animations with streaming video in low resolution.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Tuesday, May 11, 2010
XSPOC at the Rod Pumping Optimization Course
Terry Treiberg of Theta Oilfield Services gives a presentation at our Rod Pumping Optimization course on XSPOC. Multiple reasons to use XSPOC are given with interesting examples showing how to increase revenue.
Access this Podcast.

View XSPOC at the Rod Pumping Optimization Course with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Tuesday, May 11, 2010
XANIMATE Educational Animations Software From Theta
State of the Art Animations Show How Rod Pumping Systems and Downhole Pumps work.
Access this Podcast.

View XANIMATE Educational Animations Software From Theta with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Tuesday, May 4, 2010
XROD-V and Deviated Wells
John Svinos teaches the audience at the Southwest Petroleum Short Course about XROD and RODSTAR. The history and layout of these two programs is covered along with some examples.
Access this Podcast.

View XROD-V and Deviated Wells with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Thursday, April 29, 2010
Visualization of the Operation of the Sucker Rod Pump & Downhole Gas Separators
Tony Podio gives two presentations at the Southwest Petroleum Short Course.
Access this Podcast.

View Visualization of the Operation of the Sucker Rod Pump & Downhole Gas Separators with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Tuesday, April 20, 2010
Acoustic Liquid Level Tests Applied to Sucker Rod Lift
Jim McCoy gives a presentation on how to use acoustic liquid level tests to optimize well production. Jim's presentation also has a heavy focus on equations that help calculate different types of downhole pressure.
Access this Podcast.

View Acoustic Liquid Level Tests Applied to Sucker Rod Lift with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Tuesday, April 13, 2010
Rod Pump Controllers
Andy Cordova talks about the various rod pump controllers and the technology associated with them. Pump Card comparisons with explanations of the variations are also included.
Access this Podcast.

View Rod Pump Controllers with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Tuesday, April 13, 2010
The New Fiberod Stress Range Diagram
Fred Morrow with John Crane Production Solutions and John Svinos of Theta Oilfield Services discuss the new Fiberod stress range diagram implemented in the latest versions of RODSTAR, XROD, XDIAG, and RODDIAG.
Access this Podcast.

View The New Fiberod Stress Range Diagram with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Wednesday, January 14, 2010
Sam Gibbs' tribute to Joe Byrd in 2005
(Powerpoint Presentation)
Powerpoint presentation given by Dr. Sam Gibbs in 2005 in honor of Joe Byrd, the inventor of the Mark II pumping unit, on the day of Joe’s 90th birthday in Lufkin TX.
Access this Podcast.

View Sam Gibbs' tribute to Joe Byrd in 2005 with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Monday, December 21, 2009
Sam Gibbs' tribute to Joe Byrd in 2005
(Video Presentation)
Video of a presentation given by Dr. Sam Gibbs in 2005 in honor of Joe Byrd, the inventor of the Mark II pumping unit, on the day of Joe’s 90th birthday in Lufkin TX.
Access this Podcast.

View Sam Gibbs' tribute to Joe Byrd in 2005 with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Monday, April 5, 2010
Causes of Sucker Rod Failures
Scott Malone of Norris Rods speaks about various causes of rod failures. Some of the topics covered are failure analysis, types of corrosion, fatigue failure, and picking the right rod guide.
Access this Podcast.

View Causes of Sucker Rod Failures with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Thursday, March 25, 2010
Conditions Concerning Incomplete Pump Fillage
Lynn Rowland gives an in depth look at the three conditions at the pump intake that can lead to problems in fillage. Lynn describes how these conditions are related to rod buckling, slippage, and other pump malfunctions while giving insight on how to avoid these problems.
Access this Podcast.

View Conditions Concerning Incomplete Pump Fillage with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Wednesday, March 24, 2010
Coupling Friction in HDPE Lined Tubing
Mike Berry presents the differences in friction on roller tubing, steel tubing, and polylined tubing. Each kind of tubing is compared with the other using advanced friction testing and data modeling designed to show how the tubing reacts to different temperatures.
Access this Podcast.

View Coupling Friction in HDPE Lined Tubing with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Tuesday, March 23, 2010
Investigation of Sucker Rod Lift Problems
John Sparks talks about his investigations as a well tech and the various problems he encountered.
Access this Podcast.

View Investigation of Sucker Rod Lift Problems with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Thursday, Mar 18, 2010
Plunger Lift Optimization - Audio Only
Dan Phillips of ConocoPhillips discusses optimization and automation of plunger lift wells. We do not have a presentation because ConocoPhillips did not want it publicized. So, this will be an audio only podcast.
Access this Podcast.

Listen Now with streaming audio.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Wednesday, March 17, 2010
The Impact of Flowline Back Pressure on Measured Surface Loads
James Harris of H&H Well Services, LLC discusses the effect of back pressure on measured surface dynamometer card loads.
Access this Podcast.

View The Impact of Flowline Back Pressure on Measured Surface Loads with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Thursday, February 11, 2010
Tubing Anchor Catcher
Phil Burke with Key Energy discusses TAC tension setting.
Access this Podcast.

View Tubing Anchor Catcher with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Wednesday, February 03, 2010
Benefits of Various BPU Geometries
Jeff Dacunha of Spirit explains the benefits of common pumping unit geometries.
Access this Podcast.

View Benefits of Various BPU Geometries with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Tuesday, February 02, 2010
Automated / Robotic Pulling Unit
Fred Newman discribes the future of the Pulling Unit Automation.
Access this Podcast.

View Automated / Robotic Pulling Unit with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Monday, February 01, 2010
Using Infrared Thermography for Tanks and Vessells
This presentation discusses how infrared thermography is used for tanks and vessels.
Access this Podcast.

View Using Infrared Thermography for Tanks and Vessells with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Wednesday, January 27, 2010
Designing with Glass Rods
Fred Morrow discusses how to design rod pumping systems using fiberglass sucker rods.
Access this Podcast.

View Designing with Glass Rods with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Monday, January 25, 2010
Constant Build Rate vs. Changing Build Rate
Fred Morrow discusses how to design deviated wells for constant side loads.
Access this Podcast.

View Constant Build Rate vs. Changing Build Rate with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Friday, January 22, 2010
Shear Pins and On-Off Tools
Fred Morrow discusses how to design shear pins and on-off tools.
Access this Podcast.

View Shear Pins and On-Off Tools with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Tuesday, January 05, 2010
Proper Grounding and TVSS Installation
Proper Grounding and TVSS Installation Reduces Electrical Maintenance by 65%. 2009 Artificial Lift Forum presentation by Salvatore F. Grande III, Magney Grande and Kenneth Lacey of Custom Submersible.
Access this Podcast.

View Proper Grounding and TVSS Installation with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Wednesday, December 09, 2009
The Duralift Pumping Unit
The Duralift pumping unit by Jonh Laney of OXY and Larry Best with Chaparral Automation.
Access this Podcast.

View The Duralift Pumping Unit with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Tuesday, December 08, 2009
Using Artificial Intelligence to Design Rod Pumping Systems
2009 Artificial Lift Forum presentation by John Svinos of Theta Oilfield Services, Inc.
Access this Podcast.

View Using Artificial Intelligence to Design Rod Pumping Systems with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Tuesday, December 08, 2009
Minimizing Rod Buckling to Reduce Tubing Failures Using Sinker Bars
2009 Artificial Lift Forum presentation by David Bishop of Fasken Oil and Ranch, LTD and Scott Long of Flexbar, Inc.
Access this Podcast.

View Minimizing Rod Buckling to Reduce Tubing Failures Using Sinker Bars with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Friday, December 04, 2009
Beam Well Head Compression
2009 Artificial Lift Forum presentation by Jerry Harrison of OXY and Charlie McCoy of Permian Production Equipment, Inc.
Access this Podcast.

View Beam Well Head Compression with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Tuesday, December 01, 2009
Optimizing the Co$t of Paraffin Treatments
2009 Artificial Lift Forum presentation by Albert S. Garza of Pioneer Natural Resources
Access this Podcast.

View Optimizing the Co$t of Paraffin Treatments with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Friday, September 18, 2009
Jim McCoy: Acoustic Liquid Level Measurements
Jim McCoy, the owner and founder of Echometer discusses how to use acoustic liquid level tests to help you optimize pumping system production capacity.
Access this Podcast.

View Jim McCoy: Acoustic Liquid Level Measurements with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Tuesday, August 18, 2009
Geared Centrifugal Pump
This Podcast describes a new Geared Centrifugal Pump (GPC) system. This system allows high volume artificial lift by using a progressive cavity pump style rotating rod string that drives a bottom intake ESP style multi-stage centrifugal pump via a downhole speed increasing transmission.
Access this Podcast.

View Geared Centrifugal Pump with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Monday, August 17, 2009
Linear Actuator Versus Beam Pumps
This Podcast describes the differences between traditional beam pumping systems and a new pumping system that uses a Linear Actuator for lifting the rods. This new system is less massive than comparable walking beam units and can be mounted directly to the well head. Also, linear pumping units provide independent control of upstroke and downstroke peak velocities as well as the shape of the velocity profile.
Access this Podcast.

View Linear Actuator Versus Beam Pumps with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Tuesday, June 23, 2009
Using Wellview for Failure Analysis at ConocoPhillips. Video Version.
Judy Roper with ConocoPhillips discusses the implementation of the Wellview failure tracking software at ConocoPhillips. Presented at the Midland Artificial Lift Forum on November 8, 2006. Video Version.
Access this Podcast.

View Integration of XSPOC and Wellview at ConocoPhillips with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Friday, June 19, 2009
Integration of XSPOC and Wellview at ConocoPhillips. Video Version.
Dan Phillips with ConocoPhillips discusses the integration between XSPOC and Wellview. Presented at the Midland Artificial Lift Forum on November 8, 2006.
Access this Podcast.

View Integration of XSPOC and Wellview at ConocoPhillips with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Thursday, May 21, 2009
Extending Tubing Life with EndurAlloy Tubing
This Podcast describes how Pioneer Natural Resources was able to increase the mean time between tubing leaks by installing EndurAlloy tubing on 18 rod pumping wells.
Access this Podcast.

View Extending Tubing Life with EndurAlloy Tubing with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Friday, May 15, 2009
Well Weighing - A Lost Art
This Podcast describes the advantages of obtaining a thorough well analysis the old fashioned way and gives examples of how a dynamometer and fluid level analysis outweigh any other type of study that can be performed.
Access this Podcast.

View Well Weighing - A Lost Art with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Friday, May 01, 2009
PNR Training on Rod Pump Tagging
This Podcast describes the training developed for the Employees of Pioneer Natural Resources regarding the issue of pump tagging and its effects on the entire pumping system.
Access this Podcast.

View PNR Training on Rod Pump Tagging with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Thursday, Apr 02, 2009
Theta Oilfield Services Software
John Svinos gives a brief description of all Theta Oilfield Services Software in this Power Point video presentation.
Access this Podcast.

View Theta Oilfield Services Software with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Tuesday, Dec 30, 2008
How to use XDIAG
A brief explanation of how to use XDIAG by John Svinos
Access this Podcast.

View How to Use XDIAG with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Monday, Dec 15, 2008
Sam Gibbs - Video PowerPoint Presentation
Dr. Sam Gibbs discusses the history of the dynamometer and Wave Equation diagnostic method. (Video Version)
Access this Podcast.

View Sam Gibbs PowerPoint Presentation with streaming video.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Wednesday, Dec 03, 2008
Sam Gibbs - Audio Only
Dr. Sam Gibbs discusses the history of the dynamometer and Wave Equation diagnostic method. (Audio Version) Listen in.
Access this Podcast.

Listen Now with streaming audio.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Thursday, Apr 22, 2008
Introducing XROD-V
Introductory presentation on the soon-to-be-released XROD-V product. Using artificial intelligence technology, XROD-V will take the design of Rod Pumping Systems to a whole new level of automation.
Access this Podcast.

View XROD-V Introduction with streaming video.

View XROD-V Demonstration with streaming video.

Tuesday, Nov 20, 2007
HES Benefits of XSPOC
John Svinos and Marlene Leonard of Theta Oilfield Services discuss XSPOC features that can affect Health, Environmental, and Safety (HES) needs of oil companies. Listen in.
Access this Podcast.

Listen Now with streaming audio.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Thursday, Oct 18, 2007
Hess Corp. - Randy King
Randy King, production supervisor with Hess Corp. in Seminole, TX discusses an environmentally friendly stuffing box and optimizing gassy rod pumping wells. Listen in.
Access this Podcast.

Listen Now with streaming audio.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Monday, May 14, 2007
Fred Morrow - Part 2.
Fred Morrow and John Svinos discuss topics related to rod pumping system diagnostic analysis and design. Listen in.
Access this Podcast.

Listen Now with streaming audio.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Monday, May 07, 2007
Fred Morrow - Part 1.
Fred Morrow and John Svinos discuss the Permissible Load HP and many other topics related to pumping units and system design. Listen in.
Access this Podcast.

Listen Now with streaming audio.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Monday, April 30, 2007
Vernon Mackie of ConocoPhillips on Gasssy Wells.
Vernon Mackie - Field technician with ConocoPhillips discusses polished rod spacers and gassy wells. Listen in.
Access this Podcast.

Listen Now with streaming audio.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Monday, April 23, 2007
A New Look at the Old Way of Designing Sucker Rods.
Presentation by Fred Morrow on API RP-11L calculations. Listen in.
Access this Podcast.

Listen Now with streaming audio.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Tuesday, February 27, 2007
Pumping Unit Data Requirements for RODSTAR, RODDIAG, and XDIAG.
John Svinos discusses the data required to enter new pumping units in RODSTAR, RODDIAG, or XDIAG. Listen in.
Access this Podcast.

Listen Now with streaming audio.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Thursday, January 4, 2007
Fiberglass Rod History and Application.
Fiberglass rod pioneer Russ Rutledge of Fibercom and Fred Morrow VP of Engineering for Fibercom discuss how fiberglass rods were developed and how they are used in the oilfield. Listen in.
Access this Podcast.

Listen Now with streaming audio.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Tuesday, December 5, 2006
The new VFD from Lufkin Automation.
Mr. Andy Cordova, the North American Sales Manager for Lufkin Automation discusses the new Variable Frequency Drive they developed. Listen in.
Access this Podcast.

Listen Now with streaming audio.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Friday, December 1, 2006
The SAM POC from Lufkin Automation.
Mr. Andy Cordova, the North American Sales Manager for Lufkin Automation discusses the state of the art SAM rod pump controller. Listen in.
Access this Podcast.

Listen Now with streaming audio.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Monday, November 27, 2006
Using Wellview for Failure Analysis at ConocoPhillips.
Judy Roper with ConocoPhillips discusses the implementation of the Wellview failure tracking software at ConocoPhillips. Presented at the Midland Artificial Lift Forum on November 8, 2006. Listen in.
Access this Podcast.

Download the Slide Show that accompanies this audio presentation: PowerPoint Format (requires that you have Microsoft PowerPoint on your computer.) Macromedia Flash Format

Listen Now with streaming audio.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Tuesday, November 21, 2006
Integration of XSPOC and Wellview at ConocoPhillips.
Dan Phillips with ConocoPhillips discusses the integration between XSPOC and Wellview. Presented at the Midland Artificial Lift Forum on November 8, 2006. Listen in.
Access this Podcast.

Download the Slide Show that accompanies this audio presentation: PowerPoint Format (requires that you have Microsoft PowerPoint on your computer.) Macromedia Flash Format

Listen Now with streaming audio.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Tuesday, October 31, 2006
USC Rod Pumping Optimization Lecture.
John Svinos describes modern rod pumping optimization software to Petroleum Engineering students at University of Southern California. Listen in.
Access this Podcast.

Listen Now with streaming audio.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Tuesday, October 24, 2006
Nesmith & Svinos on RODSTAR support.
Rudy Nesmith and John Svinos discuss technical support and the new releases of RODSTAR. Listen in.
Access this Podcast.

Listen Now with streaming audio.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.

Friday, July 21, 2006
Treiberg & Svinos on XSPOC automation.
Terry Treiberg and John Svinos describe the XSPOC automation software and how it can be used to save money by optimizing oilfield operations. Listen in.
Access this Podcast.

Listen Now with streaming audio.

Display the RSS feed for use in your podcasting software.

Launch the podcast in iTunes.